MIL-PRF-44015A(GL)
4.1.2 Conformance inspection. Conformance inspection shall
consist of all the verifications specified in table I. Sampling
for this inspection shall be as specified in the contract or
purchase order (see 6.2).
4.2 Verification methods. Verification methods can include
visual examination, measurement, testing, simulation, modeling,
engineering evaluation, component properties analysis,
certification, and similarity to previously-approved or
previously-qualified designs.
4.2.1 Verification alternatives. The contractor may propose
alternative test methods, techniques, or equipment, including
application of statistical process control, tool control, or
cost-effective sampling procedures to verify performance (see
6.4).
4.2.2 Verification conditions. The test load within the
container shall be uniformly distributed, except as otherwise
specified herein. On completion of each test, the container
shall be examined to determine compliance with section 3. During
tests, tare weight of container is the empty weight of container.
4.2.3 Verification sequence. The container shall first be
tested for weatherproofness before application of finish painting
or undercoating. Other verifications shall be made after finish
painting and undercoating. A second test for weatherproofness
shall be made after completion of all other tests. Airtightness
testing shall be conducted after all structural tests of 4.5.2,
followed by heat leakage testing.
4.2.4 Certificates of compliance. Where certificates of
compliance are submitted, the Government reserves the right to
check and test such items to determine the validity of the
certification.
4.3 Operating requirements verification.
All operating
requirements shall be verified as follows.
4.3.1 Heat leakage test. Conduct a heat leakage test in
accordance with ISO 1496, Test No. 15 - Heat leakage test.
Verify that the maximum heat leakage is no greater than 15
Watts/Kelvin (28.5 Btu/hr deg F).
4.3.2
Air leakage test.
Conduct an airtightness test in
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business