MIL-PRF-44015A(GL)
4.4.2 Refrigerator interface inspection. Verify refrigerator
opening and dimensions are in accordance with figure 1. Measure
clearance between end wall and rear corner fittings to verify a
minimum 18-inch clearance. Verify that plywood cover is provided
to be used when the refrigeration unit is not in place.
4.4.3 Padlock inspection. Verify padlock and keys are as
specified in ASTM F883 and fits in the latch on the door handle.
4.4.4 Interchangeability certification. The contractor shall
certify that all component parts of the container which are
replaceable are interchangeable with the same parts of other
containers furnished under the same contract.
4.5 Support or ownership requirements verification. All
support or ownership requirements shall be verified as follows.
4.5.1 Weight inspection. Verify, by weighing, that the
container weighs no more than 3500 pounds.
4.5.2 Structural requirement tests. The structural
requirements shall be verified as follows.
4.5.2.1 Stacking test. The containers shall undergo the
stacking test of ISO 1496-2 Test No. 1 - Stacking. Upon
completion of test verify that the container has no permanent
deformation or abnormality which will render it unsuitable for
use.
The
4.5.2.2 Lifting from top corner fittings test.
containers shall undergo the lifting test of ISO 1496-2 Test No.
2 - Lifting from the four top corner fittings. Upon completion
of test verify that the container has no permanent deformation or
abnormality which will render it unsuitable for use.
4.5.2.3 Lifting from bottom corner fittings test. The
containers shall undergo the lifting test of ISO 1496-2 Test No.
3 - Lifting from the four bottom corner fittings. Upon
completion of test verify that the container has no permanent
deformation or abnormality which will render it unsuitable for
use.
4.5.2.4 Longitudinal restraint test. The containers shall
undergo the restraint test of ISO 1496-2 Test No. 4 - Restraint
(longitudinal).
Upon completion of test verify that the
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business