MIL-PRF-44035B
to the design reliability test.
3.3.3 Service and maintenance. All major components shall be
accessible for adjustment, maintenance, servicing, and
replacement without removing any other major component. All
other components and assemblies shall be designed for ease of
installation and replacement and shall be accessible for
maintenance, service, and replacement with minimum disturbance to
adjacent components. No special tools shall be needed for any
maintenance, repair, service, installation or replacement action.
Condenser and evaporator fins shall be protected from any damage
that might occur during servicing or maintenance actions.
Operator personnel shall be able to visually check the moisture
content of the refrigeration system on all refrigeration units.
All points requiring lubrication shall be equipped with standard
fittings and shall be accessible from the outside of the unit.
Each unit shall have the fittings or location tagged to indicate
the temperature and grade of lubricant used and recommended
frequency of lubrication.
3.3.4 Marking. Identification, instruction, control, and gage
plates shall be of corrosion resistant material permanently
attached to the outside of the unit. Numbering and lettering
shall be permanently inscribed and shall be no less than 1/16"
high. All plates shall blend with the enclosure finish and shall
have a nonreflective finish.
3.3.4.1 Identification plate. The data name plate shall
contain the following information:
1.
U.S.
2.
Model number and nomenclature
3.
National Stock Number (NSN)
4.
Serial number
5.
Contract number
6.
Manufacturer's name and address
7.
Manufacturer's model number
8.
Commercial and Government Entity (CAGE) number
9.
Technical manual number, if applicable (see 6.2 and
6.5)
10. Weight
11. Refrigerant used
3.3.4.1.1
Marine Corps identification plate. When the
procurement is for the Marine Corps (see 6.2), the identification
plates, together with any data that differs from the above
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business