A-A-54475
* 115 VAC plus or minus 10 percent, 50 Hz plus or minus 2 Hz (single-phase)
* 115 VAC plus or minus 10 percent, 60 Hz plus or minus 2 Hz (single-phase)
* 230 VAC plus or minus 10 percent, 30 Hz plus or minus 2 Hz (single-phase)
* 230 VAC plus OP minus 10 percent, 60 Hz plus or minus 2 Hz (single-phase)
Change over devices, switches, circuits, or transformers if used for the purpose of voltage or frequency conversion, shall be clearly marked and identified in the appropriate documentation which accompanies the unit. Mechanical or electrical adjustments to effect the conversion shall not require the use of specialized tools or skills.
Identification marking. Each refrigeration unit shall bear the following data on one or more nameplates:
a. Name or registered trademark of the manufacturer.
b. Type or model number.
c. Serial number.
d. Electrical characteristics (in accordance with UL 471).
e. Refrigerant used, expressed in chemical and common form and amount used.
f. Factory test pressure.
Marking shall be permanent, distinct, and legible. Nameplates secured by adhesives shall not be used.
Finish. The refrigerator shall be fabricated from materials which are inherently resistant to corrosion or which are treated to render them corrosion resistant. Where painting or plating is used, appropriate cleaning and priming shall be performed prior to finishing. Finish shall provide a pleasing professional appearance and be free of gaps, scratches, chips and other imperfections.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business