A-A-50154
1.4 Electrical characteristics. The freezer base shall operate on 120 volts, 60 Hertz, single phase power source in the United States and 220 volts, 50 Hertz, single power source overseas.
1.5 Standard compliance. The freezer base shall comply with Underwriters Laboratories, Inc., Standard No.471, National Sanitation Foundation Standards Nos.1 and 7, and National Electrical Manufacturers Association MG-1.
1.6 Identification plate. In addition to the markings required by UL 471, the freezer base shall have an identification plate that includes the contract number and national stock number.
2. QUALITY ASSURANCE.
2.1 Certification. The contractor shall certify that the product offered meets the salient characteristics and requirements of this description and conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified for any commercial characteristics the contractor shall furnish data resulting from inspection conducted in accordance with the specified quality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3. PACKAGING.
3.1 Packaging and packing. Packaging and packing shall be commercial or export, as specified (see 4.2).
3.2 Commercial packaging, and packing. Each freezer base shall be cleaned, preserved, packaged, packed, and unitized in accordance with ASTM D 3951.
3.3 Export.
3.3.1 Export packaging. The legs of the freezer base shall be disassembled. The legs and fasteners shall be packaged in a domestic fiberboard box constructed and closed in accordance with PPP-B-636. The box shall be secured in place inside one of the freezer compartments. The shelves shall be packaged in a PPP-B-636 box and the box rigidly secured within one of the compartments. The outside temperature gauge shall be covered with a fiberboard pad or cushioning material and the pad or material be secured in place with pressure-sensitive tape. The freezer base shall be cleaned, preserved, cushioned, and secured to protect if against corrosion, deterioration and physical damage during shipment and storage.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business