A-A-52150
Environmental Protection Agency (EPA) Clean Air Act Amendment
42 USC 7671a(a) and 40 CFR 82
National Electric Manufacturers Association (NEMA)
Standard WD-1
National Fire Protection Association (NFPA) Standard No. 70
Underwriters Laboratories Inc. Standards No. 62, and 471
2.4 Identification marking. Each explosion proof refrigerator freezer shall be furnished with a metal identification plate permanently attached to the exterior surface of the refrigerator in a conspicuous place. Use of a permanent “stick-on” label is acceptable. Use of removable labels is prohibited. The metal plate shall contain the following information:
Contract Number
Manufacturer’s Cage Code or Name, Address, and Telephone Number
Manufacturer’s Model Number Designation
Unit Capacity
Type and Amount of Refrigerant required for system
Electrical power required
3. QUALITY ASSURANCE PROVISIONS
3.1 Contractor certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial market place. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376 and all other requirements of this CID are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request shall be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business